Inserting Batteries into the Remote Control

Before you can use the remote control, you must first insert the supplied batteries. If you want to use this remote control to operate other video components, such as a TV or cable box, you must also program the remote as described in the Appendix on page 85.

To install the batteries:

1 Push and slide open the battery compartment.

SAT-A2 Remote Control:

SAT-B2 Remote Control:

2 Insert two size AA batteries (supplied). Be sure to line up the + and

–on the batteries with the + and – on the battery compartment.

Notes on Batteries

When the batteries become weak, the Function button indicator blinks. If the remote control does not operate properly, the batteries might be worn out. When replacing batteries, replace both of them with new ones, and do not mix different types of batteries together.

When you remove the batteries — to replace them, for example — any codes you’ve set may be erased. If this happens, you must reprogram the remote. See “Programming the Remote Control” on page 85 for details.

6Chapter 1: Introducing the DSS System