Hooking Up the Audio ComponentsConnecting via ANALOG 2CH OUT jacks

Getting

Use an audio connecting cords for this connection. Connect the

 

 

ANALOG 2CH OUT L/R jacks to the CD (SACD) input jacks of

Started

your amplifier. Be sure to match the colour-coded pin to the

appropriate jacks: white (left) to white and red (right) to red.

 

 

SCD-XA777ES

 

 

Audio connecting cords (Red and White)

(supplied)

 

White (L)

White (L)

 

Red (R)

Red (R)

 

SCD-XA333ES

 

 

Audio connecting cords (Red and White)

(not supplied*)

 

White (L)

White (L)

 

Red (R)

Red (R)

*If you do not make the ANALOG 5.1 CH connection (page 5), you can use the supplied audio connecting cable for the ANALOG 2CH connection.

 

 

CENTER

 

 

L

L

 

 

 

 

 

 

5.1CH OUT

OPTICAL

R

R

 

COAXIAL

 

 

OUT

 

 

 

 

 

 

 

DIGITAL(CD)

FRONT

SURROUND

SUB WOOFER

 

 

R

 

L

2CH OUT

 

Notes

During playback of a Multi-channel Super Audio CD, no signal is output from the ANALOG 2CH OUT jacks. (SCD-XA777ES only)

During playback of a Multi-channel Super Audio CD, the same signal that is output from the ANALOG 5.1CH FRONT L/R jacks is also output from the ANALOG 2CH OUT jacks. (The down mixed signal of the Multi-channel signal is not played back.) (SCD-XA333ES only)

About the ANALOG 2CH OUT (SCD-XA777ES only)

When you play a conventional CD or a 2CH Super Audio CD, the stereo signal is sent to the FRONT, SURROUND, and CENTER/ SUB WOOFER D/A Converters, and each signal is combined after D/A conversion, then combined signal is output from the 2CH OUT jacks.

Since each digital signal is converted to analog signal by three converters, this system offers a three-fold improvement in a signal quality and a root three-fold in noise ratio, and results in improvement in a signal to noise ratio. Therefore, the high quality signal is output from the ANALOG 2CH OUT jacks. However, because of the system, no signal is output from the ANALOG 2CH OUT jacks during playback of a Multi-channel Super Audio CD. Similarly, no signal is output from the PHONES jack during playback of a Multi-channel Super Audio CD.

AC IN

To CD (SACD) IN jacks (L/R)

This illustration is for SCD-XA777ES. For SCD-

XA333ES, connect the same jacks of SCD-

XA777ES (see page 10).

Stereo amplifier, etc.

6GB