INSTALLATION
HOOD INSTALLATION
1.Adjust chimney mounting structure to E + 3/8” dimension as determined in installation height calculation on page 7. Use 2 screws per attachment leg, see Fig. 3.
2.To install Chimney Structure to ceiling, use a 10mm or adjustable wrench or flat head screwdriver.
a.Drill pilot holes into ceiling at fixing points as determined in Step 6 under Ceiling Preparation (Pg. 8).
b.Screw the 4 lag screws provided (see Fig. 4, do not tighten completely).
c.Attach mounting structure to joists with the 4 lag screws provided. (see Fig. 4, keep 10” duct inside structure) .
ATTENTION: Junction Box on the chim ney structure should be oriented to the right side when facing the front of the cooktop.
d. Tighten the 4 lag screws, see Fig. 4.
Attachment
Leg
Junction
Box
FIG.3
Ceiling
Fixing point
Leg screw
10" Duct | 1/2" Conduit |
Chimney
Structure
FIG.4
9