DCS 221712 manual Installation, Baffle filter panel

INSTALLATION

2.Snap the central baffle filter panel into the place so the both rails engage with side pins on both sides of hood. Drive 2 screws (1 on each side ) through baffle filter panel hole to hood. See Fig. 12.

3.Snap four-side baffle trim to hood (4 pins engage each side trim). The baffle trims are supplied separately (for IVS52 only). See Fig. 13.

Baffle filter panel

Fixing screw location

Fig. 12

Baffle trim

Fig. 13

4.Install all baffle filters as per Use and Care Manual instructions.

12