INSTALLATION
9.Ducting: There should be no more than 1" gap between canopy transition and house ducting. Adjust starting collar over both ducts. Tighten collar. Fasten duct with screws and tape per code. Screws must not hamper the damper. See Fig. 9.
INTEGRAL VENTILATOR INSTALLATION
(see Fig. 10 to 11)
1.The Integral ventilator can be mounted to discharge air towards the ceiling. So motor connector may be located frontwards.
From the inside of the hood, slip motor into the bracket on the left.
Rotate motor upwards until it snaps into the spring clip on the right.
Secure the motor to the hood with the machine screw and lock washer.
Plug connector into the motor, Fig. 11.
From Control |
Panel |
Motor connector |
FIG. 11
10" Duct
Collar
Transition |
FIG. 9
|
| Outlet |
| Bracket | Spring Clip |
|
| |
| Integral ventilator for 40" Hood | |
Bracket |
| Motor Connector |
|
|
Fixing | Fixing |
point | point |
Motor
support
Spring Clip
FIG. 10
11