INSTALLATION
2.Install the two brackets to the chimney structure supplied with the kit by using one screw each side.
3.Join the two top sections of the duct cover.
Screw the two sections together with 8 screws (4 each side- see the top view in Fig. 16 for joining the two sections).
4.Install the top duct cover assembly to the bracket, near the ceiling, with two screws (one each side).
Fix to the top
Duct cover
Top section
Bracket
Duct cover
Top section
Bracket
Top Duct assembly Diagram
Drive a #10 x
Screw |
FIG. 16
15