Sony SCD-XB770 23GB, Adjusting the output level balance Each speaker, During playback, go to Step

About “Large” or “Small” speaker

A “Large” speaker is a speaker that can reproduce bass frequencies plentifully. If you select “Small” for the surround speakers, the bass frequencies will come from the front speakers and/or sub woofer.

For normal use, select “MCH Direct” or set all the speakers to “Large” (ex. “5 – Large + SW,” “5 – Large,” etc.). If the sound is noisy or the Multi-channel playback is not effective while playing a Multi-channel Super Audio CD, change the settings of the speakers concerned to “Small.”

4Turn l AMS L until desired mode appears in the display.

5Press l AMS L.

The output level balance setting display appears. To set the output level balance, go to Step 4 in “Adjusting the output level balance on the front panel of the player” on page 23 or Step 2 in “Adjusting the output level from the remote” on page 24.

To return to the normal display, press MENU.

Notes

•The Multi-channel management function does not work when you select “MCH Direct” (you cannot set the output level balance of each speaker).

•The front speaker setting is set to “Large” automatically when you set the Sub woofer to “––.”

•When you play a track that does not contain the LFE* signal, the signal for the Sub woofer does not output. Therefore, when you select “MCH Direct,” “5 – Large + SW,” or “No – CNTR + SW,” no signal outputs from the Sub woofer. However, when you select “5 – Small + SW” or “FRT – Large +SW” (when you set the speaker setting to “Small”), the bass frequencies will come from the sub woofer.

*Low Frequency Enhancement (described as “.1 CH”)

Adjusting the output level balance of

each speaker

You can adjust following items with the Multi-channel management function:

CNTR BALANCE

The relative output level balance between the front speakers (FRONT L/R) and the center speaker (CENTER)

SURR BALANCE

The relative output level balance between the front speakers (FRONT L/R) and the surround speakers (SURR L/R)

SW BALANCE

The relative output level balance between the front speakers (FRONT L/R) and the sub woofer (SUB

WOOFER)

Note

Some adjustment may not work depending on the Multi-channel playback mode that you selected.

Adjusting the output level balance on the front panel of the player

You can adjust the output level balance of each speaker while listening during playback. You can also adjust while listening to the test tone during stop mode.

1Press MENU.

2Turn l AMS L until “LEVEL ADJUST” appears in the display.

3Press l AMS L.

During playback, go to Step 6.

4Turn l AMS L until “TONE ON” appears in the display.

5Press l AMS L.

The test tone issues from the speakers in sequence with the speaker type appearing in the display.

6Turn l AMS L until the desired item appears in the display.

Select the item from “CNTR BALANCE,” “SURR BALANCE,” or “SW BALANCE.”

Note

When you set the Sub woofer to “––” in the Multi-channel playback mode (page 22), “SW BALANCE” does not appear. Similarly, “CNTR BALANCE” or “SURR BALANCE” does not appear when you set the corresponding speaker to “––.”

Playing Discs

23GB