Sony SCD-XE597 To set the command mode of the remote, To set the command mode of this player, Turn, ENTER on the remote), 1Press MENU on the player

Connecting a digital component

When you connect an MD deck or another digital component through the DIGITAL (CD) OUT OPTICAL connector, you can make a digital recording.

Use an optical digital cable for this connection. When connecting the optical digital cable to the DIGITAL (CD) OUT OPTICAL connector, push the cable plug in until it clicks into place. Be careful not to bend or twist the optical cable.

Optical digital cable (not supplied)

Note

Only the audio signals of conventional CDs can be output from the DIGITAL (CD) OUT OPTICAL connector. Those of the Super Audio CD cannot be output through the DIGITAL (CD) OUT OPTICAL connector.

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

Note

Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.

When using another Sony CD player in conjunction with this player

You can set the supplied remote to be effective on this player only by changing the command mode of the remote.

To set the command mode of the remote

•If the other player’s command mode can be set:

Set the CD1/2 switch of this player’s remote to CD1 (factory setting), and set the other player’s remote to CD2.

•If the other player’s command mode cannot be set:

Set the CD1/2 switch of this player’s remote to CD2.

To set the command mode of this player

1Press MENU on the player.

2Turn l AMS L (or press ./> on the remote repeatedly) to select “CD1/2 SEL”.

3Press l AMS L (or ENTER on the remote).

The current command mode appears.

4Turn l AMS L (or press ./> on the remote) to select “CD – 1” or “CD – 2”, then press l AMS L (or

ENTER on the remote).

8GB