Press MENU on the player.
Turn on the amplifier. Turn down the volume level to the lowest.
Select the player position using the input selector on the amplifier.
Press POWER on the player to turn on the player.

Playing Discs

Playing a Disc

The operations for normal play and the basic operations during play are explained below.

1

2

3

4 Press A on the player to open the disc tray, and place a disc on the tray.

With the label side up

5 Press H.

Playback starts from the first track. If you want to start playing from a specific track, turn l AMS L (or press ./> on the remote repeatedly) to select the track number before pressing H.

6 Adjust the volume on the amplifier.

Basic operations during play

To

Do the following:

Stop play

Press x.

 

 

Pause play

Press X.

 

 

Resume play

Press X or H.

after pausing

 

 

 

Select a track

Turn l AMS L (or press

 

./> on the remote

 

repeatedly).

 

 

Eject a disc

Press A on the player.

 

 

Tip

If you turn on the player when a disc is already loaded, playback starts automatically. If you connect a commercially available timer, you can set it to start playing the disc at any time you want.

Note

 

During playback, increase the volume level gradually

 

starting from the lowest level. The output from this

 

player may contain band width that is out of the normal

 

listening range. This may cause damage to the speakers

 

or ears.

 

Playing

 

 

Selecting the playback layer

Discs

When playing a hybrid disc with an SA-CD

 

layer and a CD layer (page 5), you can select the

 

layer you want to listen to. Also, since both

 

layers are on one side, it is not necessary to turn

 

the disc over.

 

Press SA-CD/CD to select the desired playback layer.

To select the default playback layer

1

2 Turn l AMS L (or press ./> on the remote repeatedly) until “LAYER SEL” appears in the display.

3 Press l AMS L (or ENTER on the remote).

The current default layer appears.

4 Turn l AMS L (or press ./> on the remote) to select the desired playback layer.

5 Press l AMS L (or ENTER on the remote).

Selecting the playback area

When playing a disc with the 2 channel playback area and the multi-channel playback area (page 5), you can select the playback area you want to listen to.

Press MULTI/2CH to select the desired playback area.

continued

9GB