Note You may not be able to print pictures that you cannot display on your phone.

4.To set the print settings, highlight each element and select a setting using your navigation key right or left.

Type: You can select the print mode from DefaultPrinter, StandardPrint, or IndexPrint.

Copies: You can set the number of copies from Single, Doubles, or Manual. When you select Manual, set the number (up to 10 per picture) by pressing your navigation key right or left. The number of copies will be displayed in the field below.

Size: You can set the print size from DefaultPrinter, 4"x6", 5"x7", 8"x10", or Letter. (Print sizes may vary according to the type of printer you have.)

Date: You can imprint the date on your pictures. Select On or Off. (Date stamping may not be available depending on the type of printer you have.)

5.When you have finished selecting the printer settings, press PRINT (left softkey).

Note

While you are connected to the printer, your phone’s

 

screen will display “Phone Off.” You cannot make or

 

receive calls during this time.

 

 

6.When printing is finished, press , and then press .

7.Press YES (left softkey). Follow the instructions on the display to unplug the USB cable from the phone.

PictBridge

From time to time you may encounter printing

Error

problems. Your phone will display any printer

Messages

error messages informing you of the specific

problems encountered. Please refer to the

 

user’s guide that came with your printer for

 

descriptions, explanations, and possible

 

resolutions for any error messages.

 

 

90 2G. Camera

Page 102
Image 102
Sony SCP3810 manual When printing is finished, press , and then press, 90 2G. Camera