Sony SCP3810 manual Making a Voice Call Using ASR, Sending a Text Message Using ASR

Making a Voice Call Using ASR

1.Press and hold or .

2.When you hear “Say a command,” say “Call.”

3.When you hear “Say the name or number,” say a name or a phone number.

4.When you hear “Which location?,” say a number type (for example, “Mobile”).

Tip	You can skip steps 3 and 4 by saying a name and
	location after “Call” without pausing (for example,
	“Call John Jones mobile”).
Note	If ASR does not recognize the name or number, it
	will find the most likely matches and display a list
	of up to three names or numbers. You will hear
	“Did you say Call…” followed by the name or
	number. You can confirm by saying “Yes.” Say
	“No” to change the selection.

Sending a Text Message Using ASR

1.Press and hold or .

2.When you hear “Say a command,” say “SendText.”

3.When you hear “Say the name or number,” say a name or a phone number.

4.When you hear “Which location?,” say a number type (for example, “Mobile”). The phone displays the text entry screen. (See page 101 for how to compose a message.)

Displaying a Contacts Entry’s Information Using ASR

1.Press and hold or .

2.When you hear “Say a command,” say “Lookup.”

3.When you hear “Say the name,” say a Contact entry’s name. The phone displays the detail screen for that Contacts entry.

72 2F. Voice Services