a TV set

5

Connecting to a VCR

Connect your PlayStation®2 console to your VCR using the supplied AV cable (integrated

Connecting to a TV with a Euro-AV Connector using the Euro-AV Connector Plug

GB

audio/video) matching the plug colours to the jacks on the VCR.

If your VCR is monaural, do not connect the red plug.

However, when playing a DVD video, do not connect the console to a VCR. If you do, the colour is disturbed. Connect the console directly to the TV.

After connecting

Set your TV and VCR adjustments appropriately. Refer to the instruction manuals for your TV and VCR.

When playing a DVD video

VCRTV

PlayStation®2

 

console

Connect directly

 

Connect your PlayStation®2 console to the Euro-AV connector (SCART) on the TV using the Euro-AV connector plug and AV Cable (integrated audio/video), making sure you match the colour-coded plugs of the AV Cable to the matching jacks of the connector plug.

After connecting

Set your TV to the appropriate video input mode. Refer to the instruction manual of your TV.

To Euro-AV

ConnectorTo AV MULTI OUT

connector

Connection

Connecting to a TV with an S VIDEO input connector
Connecting to a TV with a Euro-AV connector using the Euro-AV Cable

Connect your PlayStation®2 console to the

S VIDEO input connector on the TV using the SCPH-10060 E S VIDEO cable (sold separately) for a higher quality picture.

After connecting

Set your TV to the appropriate video input mode (such as “S VIDEO”).

To S VIDEO input

To audio input (left)

To AV MULTI OUT connector

To audio input (right)

You can improve picture quality by using the Euro-AV Cable SCPH-10142 (sold separately). Connect your PlayStation®2 console to the Euro-AV Connector on the TV.

After connecting

Set your TV to the appropriate video input mode. Refer to the instruction manual of your TV.

Note

Euro-AV cable supports the video output of PlayStation®2 and PlayStation® format software only.

Important!

To Euro-AV

To AV MULTI OUT

Connector

connector

C

Connecting to a TV with an aerial input

Connect your PlayStation®2 console to the aerial input on the TV using the SCPH-10072 C RFU adaptor (sold separately). In this case, the sound will be monaural.

After connecting

Tune your TV to channel 36.

To aerial input

To AV MULTI OUT

 

connector

C

When viewing DVD videos on your PlayStation®2, use another cable which supports PlayStation®2 format video output, for example AV cable (integrated audio/video), RFU adaptor or S VIDEO cable.

When turning on the console for the first time

The initial setup screen appears.

Set “Language,” “Time Zone” and “Daylight Savings Time (Summer Time)” according to the instructions on the screen.

Settings can be adjusted later in the system configuration menu. For details, see “Using the system configuration menu” on page 7.