20

 

 

Settings and adjustments for the DVD player (continued)

 

 

 

 

 

 

 

 

Finding a particular point on a disc (Search)

You can use the Search function to quickly locate a particular point on a DVD. You can search either forward or backward and can switch between 3 speeds and slow-motion playback speed. This function is also available using the Analog Controller (DUALSHOCK®2) when the Control Panel is not displayed.

1 During playback, use the directional buttons to select the (Search, Fast Reverse) or (Search, Fast Forward) icon. Then press and hold down the ✕ button to begin searching. Press the directional buttons to change speeds while searching.

Search speed changes as shown below when you press the directional buttons while holding down the ✕ button.

Search 3

Search 2

Search 1

Slow

2 Release the ✕ button when you reach the point you are searching for.

Playback returns to normal speed.

Using the Analog Controller (DUALSHOCK®2)

1 During playback, press and hold down the L2 or R2 button to begin searching. Press the directional buttons to change speeds while searching.

Search speed changes as shown below when you press the directional buttons while holding down the L2 or R2 button.

Search 3

Search 2

Search 1

Slow

2 Release the L2 or R2 button when you reach the point you are searching for.

Playback returns to normal speed.

Note

This function may not be available on some DVDs.

Playing in slow-motion

During playback, use the directional buttons to

select the(Slow Backward) or(Slow Forward) icon, and press the ✕ button. Slow-motion playback begins.

To end slow-motion playback

Use the directional buttons to select the N (Play) icon, and press the ✕ button. Playback returns to normal speed.

Using the Setup display

You can adjust the picture and sound settings, and set various other output options using the Setup display. You can also select a language for subtitles and menus, restrict playback by children, and so on. For details on the Setup display, see pages 21-25.

Before using the Setup display

Some menu items cannot be selected during Resume Play as noted on the pages that follow. For details on clearing Resume Play, see “To clear Resume Play” on page 16.

1 Use the directional buttons to

select the (Setup) icon, and press the ✕ button.

The Setup icon bar is displayed, giving you access to the menus shown at right.

2 Use the directional buttons to select the icon for the setting you would like to change, and press the ✕ button.

The menu for the icon selected is displayed.

3 Use the directional buttons to choose a menu item, and press the ✕ button.

The options for the menu item selected are displayed.

4 Use the directional buttons to select an option, and press the ✕ button.

The option selected is set.

After using the Setup display

To save changes made during playback, you must stop playback* or eject the DVD before pressing the 1(standby)/RESET button on the console front or turning off the console using the MAIN POWER switch on the console rear. Note that changes will not be saved if you reset or turn off the console before stopping playback, or without first ejecting the DVD.

* Stopping playback during Resume Play is included.