Sony SDM-M61 mode, (MENU, position, the screen, (ZOOM) and, press the OK button, 1 Press the MENU button, POSITION) and press the OK button, M(+)/m, M(+)/m, M(+)/m

Changing the picture size			Changing the menu ’s position
according to the signal (ZOOM)			(MENU POSITION)
The monitor is set to display the picture on the screen in full,			You can change the menu position if it is blocking an image on
irrespective of the picture’s mode or resolution in the default			the screen.
setting. You can also view the picture at its actual aspect ratio or			1 Press the MENU button.
resolution.
				The main menu appears on the screen.
1 Press the MENU button.			2
	The main menu appears on the screen.			Press the M(+)/m – buttons to select	(MENU
				POSITION) and press the OK button.
2	Press the M(+)/m – buttons to select	(ZOOM) and		The MENU POSITION menu appears on the screen.
	press the OK button.		3
	The ZOOM menu appears on the screen.			Press the M(+)/m – buttons to select the desired
3				position.
	Press the M(+)/m – buttons to select the desired			There are three positions each for the top of the screen and the
	mode.			bottom of the screen, and one for the screen center.
	1280⋅ 1024 ρεσολυτιον σιγναλσ φιλλ τηε εντιρε σχρεεν ανδ
	ΖΟΟΜ ισ νοτ ποσσιβλε ρεγαρδλεσσ οφ τηεσε σεττινγσ.

•FULL2: The input signal is displayed on the screen in full, irrespective of the picture’s mode or resolution.

•FULL1: The input signal is displayed on the screen at its actual aspect ratio. Therefore, black bands may appear at the top and bottom of the picture depending on the signal.

•REAL: The input signal is displayed on the screen at its

actual resolution. Sub-SXGA signals are displayed at the	GB
center of the screen surrounded by a black frame.

To restore the default setting (displayed on the screen in full)

Select“FULL2” in step 3.

Smoothing the picture

(SMOOTHING)

If the picture displayed at the FULL2 or FULL1 mode of ZOOM is not smooth, use the picture smoothing function. Note that 1280

⋅1024 ρεσολυτιον σιγναλσ αρε σηοων ονλψ ιν ΡΕΑΛ ∝οδε ανδ ΣΜΟΟΤΗΙΝΓ ισ νοτ ποσσιβλε.

1Πρεσσ τηε ΜΕΝΥ βυττον.Τηε ∝αιν ∝ενυ αππεαρσ ον τηε σχρεεν.2Πρεσσ τηεM(+)/m – buttons to select (SMOOTHING), and press the OK button.The SMOOTHING menu appears on the screen.3Press the M(+)/m – buttons to select the desired mode.The smoothing effect becomes stronger in the order of TEXTtSTANDARDtGRAPHICS.

•TEXT: To make the characters appear clear. (This mode is suited for text-based applications.)

•STANDARD: Standard smoothing effect (factory preset smoothing effect)

•GRAPHICS: To make the pictures appear clean. (This mode is suited for CD-ROM software such as photo images or illustrations.)

Note

When you set the ZOOM menu to REAL, the SMOOTHING menu is not available.

15