qa 0
78 qs9qd7AC IN connector (page 9)This connector connects the power cord (supplied).
8This connector inputs digital RGB video signals that comply with DVI Rev.1.0.
9HD15 input connector (analog RGB) (page 8)This connector inputs analog RGB video signals (0.700
This part secures cables and cords to the display.
qa Security lock holeThe security lock hole should be used with the Kensington Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.
qs Audio jack for INPUT1This jack inputs audio signals when connected to the audio
Setup
Before using your display, check that the following items are included in your carton:
•LCD display
•Power cord
•Stand Base
•
•
•
•Warranty card
•Quick Setup Guide
The contents with mark for specifications vary depending on the models. For details, “Specifications” (page 20).
Setup 1:Assemble the stand
Do not press the LCD display when placing or raising the display straight on a desk or a like.
It may affect the uniformity of the screen or damage the LCD display.xWhen using supplied stand1Open the carton and take out the stand base.2Confirm the supplied items.• Stand Base (with the screw at the bottom side)
3Place a soft mat or a kind on a flat surface like a desk.You may damage the LCD screen and the display itself if putting the display directly on the desk.
4Take the display out from the carton and then place the frame of the laid display along the edge of the desk.
The figure shows the height adjustable stand. If you use the fixed stand, your last step of assembling procedure is Step 5.
output jack of a computer or other audio equipment connected to INPUT1.
qd Audio jack for INPUT2This jack inputs audio signals when connected to the audio output jack of a computer or other audio equipment connected to INPUT2.
Display
Soft mat or a like
Stand
6