2Connect the video signal cables to the display.

If you use the fixed stand, draw the video signal cables through the stand hole first and then connect them to the display. For more details see “Setup 5: Secure the cords.”

xConnect a computer equipped with an HD15output connector (analog RGB)

Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the display’s HD 15 input connector (analog RGB).

Setup 3:Connect the audio cords

If you are not intended to output audio, you do not need this connection.

If you use the fixed stand, draw the audio cords through the stand hole first and then connect them to the display. For more details see “Setup 5: Secure the cords.”

1Connect the display’s audio input jack and audio output jack of the computer or other audio equipment using the audio cord (not supplied).

to the HD 15

input connector

to the computer’s HD15 output (analog RGB) connector (analog RGB)

HD15-HD15 video signal cable (analog RGB) (supplied)

to audio output of the computer or other audio equipment

to the audio input

xConnect a computer equipped with a DVIoutput connector (digital RGB)

Using the supplied DVI-D video signal cable (digital RGB), connect the computer to the display’s DVI-D input connector (digital RGB).

 

to the DVI-D

to the computer’s DVI output

input connector

(digital RGB)

connector (digital RGB)

 

DVI-D video signal cable (digital RGB) (supplied)

audio cord (not supplied)

2Connect the audio cable (not supplied) securely to the display’s audio output jack.

to the audio output

audio cable (not supplied)

Audio output will be changed when the display’s audio input and audio output connection has been completed.

Connect audio equipment that is within the input range shown in the display’s audio input specifications. Too high of an input may cause damage to the display.

8