Setup 4:Connect the power cord

If you use the fixed stand, draw the power cord through the stand hole first and then connect them to the display. For more details see “Setup 5: Secure the cords.”

1Connect the supplied power cord securely to the display’s AC IN connector.2Connect the other end securely to a power outlet.
xHeight adjustable standDraw the cords and cables through the cable holder as illustrated.

1 to AC IN

to a power outlet

2

power cord (supplied)

Setup 5:Secure the cords

xFixed Stand

Be sure that the cords and cables have been drawn into the stand hole as illustrated.

Note

When bounding the cords and cables, be sure to loosen them a little. If they get pulled hard they may come off from the connectors or plugs as you adjust the screen angle. If you stretch the cords and cables too hard they may get damaged.

Setup 6:Turn on the display and computer

1 Press the 1 (power) switch located on the front

 

US

right of the display.

 

The 1 (power) indicator lights up in green.

 

 

 

 

 

 

 

 

lights in green

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2Turn on the computer.If no picture appears on your screen•Check that the power cord and the video signal cables are properly connected.•If “NO INPUT SIGNAL” appears on the screen:

–The computer is in the power saving mode. Try pressing any key on the keyboard or moving the mouse.

–Check that the input signal setting is correct by pressing the OK button (page 11).

•If “CABLE DISCONNECTED” appears on the screen:– Check that the video signal cables are properly connected.

– Check that the input signal setting is correct by pressing the OK button (page 11).

9