Setup

Before using your monitor, check that the following items are included in your carton:

Connect a computer equipped with a DVI output connector (digital RGB)

Using the supplied DVI-D video signal cable (digital RGB), connect the computer to the monitor’s DVI-D input connector (digital RGB) for INPUT2 (SDM-X53) or INPUT3 (SDM-X73/X93).

•LCD display

•Power cord

•HD15-HD15 video signal cable (analog RGB)

•DVI-D video signal cable (digital RGB)

•Audio cord (stereo miniplug)

•CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.)

•Warranty card

•Quick Setup Guide

Setup 1:Connect the video signal cables

•Turn off the monitor and computer before connecting them.

•When connecting the computer to the monitor’s HD15 input connector (analog RGB), refer to “Connect a computer equipped with an HD15 output connector (analog RGB).”

Note

Do not touch the pins of the video signal cable connector as this might

to the DVI-D input connector (digital RGB)

to the computer’s DVI output connector (digital RGB)

DVI-D video signal cable (digital RGB) (supplied)

Connect a computer equipped with an HD15 output connector (analog RGB)

GB

bend the pins.

1Slide up the back cover.

2Tilt the display forward.

Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the monitor’s HD 15 input connector (analog RGB) for INPUT1 or INPUT2 (SDM-X73/X93).

Connect the computer according to the following illustrations.

xConnecting to an IBM PC/AT or compatible computer

to the HD 15 input connector (analog RGB)

IBM PC/AT or compatible computer

to the computer’s HD15 output connector (analog RGB)

 

HD15-HD15 video signal

IBM PC/AT or compatible

cable (analog RGB)

(supplied)

computer

 

(continued)

7