3Press the m/M buttons to select “0 RESET” and press the OK button.

The “RESET” menu appears on the screen.

4Press the m/M buttons to select the desired mode and press the OK button.

•OK: To reset all of the adjustment data in the PICTURE ADJUST menu to the default settings.

•CANCEL:To cancel resetting and return to the PICTURE ADJUST menu.

xAdjusting the SHARPNESS

Adjust to sharpen the edge of images, etc.

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (PICTURE

ADJUST) and press the OK button.

The PICTURE ADJUST menu appears on the screen.

3Press the m/M buttons to select “SHARPNESS” and press the OK button.

The “SHARPNESS” menu appears on the screen.

4Press the m/M buttons to adjust the sharpness and press the OK button.

SCREEN menu (analog RGB signal only)

You can adjust the following items using the SCREEN menu.

• AUTO

 

SCREEN

• PHASE

 

 

 

 

 

 

• PITCH

 

AU TO

• H CENTER

 

PHASE

 

P I TCH

• V CENTER

 

H

CENTER

 

V

CENTER

 

 

1 2 8 0 x 1 0 2 4 / 6 0 H z

 

 

 

E X I T

Note

When receiving digital RGB signals from the DVI-D input connector for INPUT2 (SDM-X53) and INPUT3 (SDM-X73/X93), adjustment is unnecessary.

xAutomatic picture quality adjustment function

When the monitor receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 19).

Note

While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate.

If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture

You can make further automatic adjustment of the picture quality for the current input signal (See “AUTO” below).

If you still need to make further adjustments to the picture quality

You can manually adjust the picture’s sharpness (phase/pitch) and position (horizontal/vertical position).

These adjustments are stored in memory and automatically recalled when the monitor receives a previously input and registered input signal.

xMake further automatic adjustments to the picture quality for the current input signal (AUTO)

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (SCREEN) and press the OK button.

The SCREEN menu appears on the screen.

3Press the m/M buttons to select “AUTO” and press the OK button.

Make the appropriate adjustments of the screen’s phase, pitch and horizontal/vertical position for the current input signal and store them.

xAdjust the picture’s sharpness manually

(Phase/Pitch)

You can adjust the picture’s sharpness as follows. This adjustment is effective when the computer is connected to the monitor’s HD15 input connector (analog RGB).

1Set the resolution to 1024 ⋅ 768 (SDM-X53), 1280 ⋅

1024 (SDM-X73/X93) on the computer.

2Load the CD-ROM.

3Start the CD-ROM, select the area and model, and display the test pattern.

For Windows

Click [Utility] t [Windows]/[Win Utility.exe].

For Macintosh

Click [Utility] t [Mac]/[Mac Utility].

4Press the MENU button.

The main menu appears on the screen.

5Press the m/M buttons to select (SCREEN) and press the OK button.

The SCREEN menu appears on the screen.

6Press the m/M buttons to select “PHASE” and press the OK button.

The “PHASE” adjustment menu appears on the screen.

7Press the m/M buttons until the horizontal stripes are at a minimum.

14