Maintenance (continued)

Muffler maintenance

Every 135 hours of operation, remove and clean the muffler.

WARNING!

Never operate the unit with a damaged or missing muffler or spark arrester! Operating with missing or damaged exhaust com- ponents is a fire hazard and could also damage your hearing.

1.Remove the spark plug boot.

2.Loosen the two 4 mm engine cover screws (located at the top of the recoil housing).

3.Loosen the 5 mm engine top cover screw (the screw is captive) and lift the cover from the engine.

4.Remove the two 5 mm muffler screws. Remove the lower muffler screw, then lift the muffler assembly from the engine.

5.Remove the rear muffler shield bolt and, while noting the orientation of parts, separate the muffler shield.

6.Remove the spark arrester screen and clean with a stiff bristle brush.

 

Engine cover

 

screws

 

Spark arrester

Rear muffler shield

screen

 

 

Forward

 

muffler shield

 

5 mm muffler

 

screws

Rear muffler

 

shield bolt

Lower muffler screw

 

Muffler

7.

Gently tap the muffler on a wood sur-

9. Reassemble the muffler in the reverse

 

face to dislodge any loose carbon.

order of disassembly.

 

 

 

8.

Inspect the cylinder exhaust port for

IMPORTANT!

 

carbon buildup.

If you note excessive carbon buildup, con-

 

 

sult your servicing dealer.

Long Term Storage

Whenever the unit will not be used for 30 days or longer, use the following

procedures to prepare it for storage:

■Clean external parts thoroughly and apply a light coating of oil to all metal surfaces.

■Drain all the fuel from the fuel tank.

IMPORTANT!

All stored fuels should be stabilized with a fuel stabilizer such as STA-BIL™.

To remove the remaining fuel from the fuel lines and carburetor and with the fuel drained from the fuel tank:

1.Prime the primer bulb until no more fuel is passing through.

2.Start and run the engine until stops running.

3.Repeat steps 1 and 2 until the engine will no longer start.

CAUTION!

Gasoline stored in the carburetor for extended periods can cause hard start- ing, and could also lead to increased service and maintenance costs.

■Remove the spark plug and pour about 10 cm3 (.25 oz.) of 2-cycle mixing oil into the cylinder through the spark plug hole. Slowly pull the recoil starter 2 or 3 times so oil will evenly coat the interior of the engine. Reinstall the spark plug.

■Before storing the unit, repair or replace any worn or damaged parts.

■Remove the air cleaner element from the carburetor and clean it thoroughly with soap and water. Let dry and reassemble the element.

■Store the unit in a clean, dust-free area.

17

Page 16 Page 18
Page 17
Image 17
Shindaiwa P231, 62888-94013 manual Maintenance, Long Term Storage, Muffler maintenance
Page 16 Page 18

P231, 62888-94013 specifications

Shindaiwa has long been recognized for its commitment to quality in outdoor power equipment, and the model 62888-94013, specifically the P231, is no exception. This efficient and robust handheld blower is designed for both professionals and homeowners who demand reliable performance for leaf and debris management.

One of the standout features of the Shindaiwa P231 is its impressive air velocity. With a maximum air speed of 175 mph, this blower can tackle even the most stubborn leaves and debris with ease. This powerful airflow is complemented by a lightweight design, making it easy to maneuver even during extended use. Weighing just around 9.8 lbs, the P231 minimizes operator fatigue, allowing for longer periods of operation without discomfort.

Powering the P231 is a reliable 23.9 cc two-stroke engine, engineered for efficient fuel consumption and reduced emissions. This engine technology not only adheres to environmental standards but also provides a perfect balance of power and efficiency. The use of Shindaiwa’s proprietary engine design ensures that the blower can perform consistently regardless of the conditions, whether it’s wet leaves in the fall or light debris in the spring.

Another noteworthy feature of the P231 is its durable construction. Built with high-quality materials, the blower is designed to withstand the rigors of frequent use. The ergonomic handle is designed for comfort, ensuring a secure grip that reduces vibration and enhances control during operation. Furthermore, the blower includes a user-friendly start system that makes kick-starting the engine a hassle-free experience.

Shindaiwa also prioritizes ease of maintenance in the P231 model. It is equipped with a simple air filter access and a fuel tank designed for easy refueling. This attention to user-friendliness ensures that you can keep your equipment in top condition with minimal effort.

In summary, the Shindaiwa 62888-94013 P231 is a dynamic handheld blower that combines power, efficiency, and durability. Ideal for both professional landscapers and homeowners, its features like high air velocity, quality engine technology, lightweight design, and ease of maintenance make it an excellent choice for effective outdoor cleanup. Whether it’s for a large property or routine yard work, the P231 delivers reliability and outstanding performance every time.
Top Page Image Contents