Adjust so that the horizontal stripes are at a minimum.

8Press the OK button.

The main menu appears on the screen.

If vertical stripes are observed over the entire screen, adjust the pitch using the following procedures.

9Press the m/M buttons to select “PITCH” and press the OK button.

The “PITCH” adjustment menu appears on the screen.

10Press the m/M buttons until the vertical stripes disappear.

Adjust so that the vertical stripes disappear.

11 Click [END] on the screen to turn off the test pattern.

xAdjust the picture’s position manually(H CENTER /V CENTER)

If the picture is not in the center of the screen, adjust the picture’s centering as follows.

1Set the resolution to 1024 ⋅ 768 (SDM-X53), 1280 ⋅

1024 (SDM-X73/X93) on the computer.

2Load the CD-ROM.

3Start the CD-ROM, select the area and model, and display the test pattern.

For Windows

Click [Utility] t [Windows]/[Win Utility.exe].

For Macintosh

Click [Utility] t [Mac]/[Mac Utility].

4Press the MENU button.

The main menu appears on the screen.

5 Press the m/M buttons to select

(SCREEN) and

press the OK button.

 

The SCREEN menu appears on the screen.

6Press the m/M buttons to select “H CENTER” or “V

CENTER” and press the OK button.

The “H CENTER” adjustment menu or “V CENTER” adjustment menu appears on the screen.

7Press the m/M buttons to center the test pattern on the screen.

8Click [END] on the screen to turn off the test pattern.

COLOR menu

You can select the picture’s color level for the white color field from the default color temperature settings.

Also, if necessary, you can fine tune the color temperature.

1Press the MENU button.

The main menu appears on the screen.

2 Press the m/M buttons to select (COLOR) and press the OK button.

The COLOR menu appears on the screen.

3Press the m/M buttons to select the desired color temperature and press the OK button.

Whites will change from a bluish hue to a reddish hue as the temperature is lowered from 9300K to 6500K.

xFine tuning the color temperature

The INPUT setting is stored in memory.

 

GB

SDM-X53: INPUT1 or INPUT2 (DVI-D)

 

 

SDM-X73/93: INPUT1, INPUT2 or INPUT3 (DVI-D)

1

Press the MENU button.

 

 

 

The main menu appears on the screen.

 

 

2

Press the m/M buttons to select

(COLOR) and

 

press the OK button.

 

 

The COLOR menu appears on the screen.

3Press the m/M buttons to select “ADJUST” and press the OK button.

The fine tuning menu for color temperature appears on the screen.

4Press the m/M buttons to select R (Red) or B (Blue) and press the OK button. Then press the m/M buttons to adjust the color temperature and press the OK button.

Since this adjustment changes the color temperature by increasing or decreasing the R and B components with respect to G (green), the G component is fixed.

5 Press the m/M buttons to select , then press the

OK button.

The new color setting is stored in memory and automatically recalled whenever “User” is selected.

The COLOR menu appears on the screen.

15