Setting up cable box control

(Skip this section if you are using Hookup 2, 3, 4 or 6.)

Your VCR includes a cable box control feature that allows the VCR to control most brands of cable boxes/DSS receivers via an optional Cable Mouse. With cable box control, the VCR controls channels on the cable box/DSS receiver for timer recording. You can also use the VCR’s remote commander to change channels on the cable box/DSS receiver whenever the cable box/DSS receiver is turned on even if the VCR is turned off. To use cable box control, you need to connect the Sony RM-CM101 Cable Mouse (not supplied) (pages 10 and 22) and set the code number and output channel.

MENU

EXECUTE

CURSOR

>/./?//

1 2 3

4

5

6

Number

buttons

7 8 9

0

This VCR is programmed with codes necessary to control channel selection on most brands of cable boxes at the time this VCR was manufactured. It is possible that new cable boxes may be introduced that cannot be controlled with the RM-CM101 Cable Mouse. If you have a cable box that is incompatible with this VCR, contact your cable operator –– they may be able to provide you with a compatible cable box.

1

• MENU

 

• CURSOR

Press MENU, then press CURSOR >/.to move the cursor (z) to CABLE BOX CONTROL and press EXECUTE.

When using the EASY SET UP procedure, skip this step.

CABLE BOX CONTROL

CABLE MOUSE

ON • OFF

USE / TO SELECT

PUSH MENU TO QUIT

• EXECUTE

2

Press CURSOR ?//to select ON, then

 

press CURSOR ..

• CURSOR

CABLE BOX CONTROL

 

CABLE MOUSE

• ON OFF

BOX CODE NO.

– – –

BOX OUTPUT CH

CH3

ENTER YOUR CABLE BOX CODE NO. USING 0–9 KEYS REFER TO THE OPERATING MANUAL FOR THE CODE

30

Getting Started

SONY SLV-685HF (E) 3-859-040-11 (1)

Page 30
Image 30
Sony SLV-685HF Setting up cable box control, Skip this section if you are using Hookup 2, 3, 4 or, Press Cursor, Buttons