Setting up cable box control (continued)

34

If you cannot get your VCR to control the cable box/DSS receiver

Check that the Cable Mouse is connected to the CABLE BOX CONTROL jack on the VCR.

Check the position of the Cable Mouse.

Place the cable box/DSS receiver and VCR away from each other. Do not place the cable box/DSS receiver on top of the VCR.

Try the setup again making sure to use the correct control code. If the cable box still does not respond, try the other codes that are listed.

If your cable box still does not operate with the Cable Mouse, contact your cable company to see if they can provide you with a compatible cable box.

Note

Make sure you turn off the VCR when you plug in or unplug the Cable Mouse. If you unplug the Cable Mouse and plug it in again, turn on the VCR before you use the cable box/DSS receiver control feature.

Getting Started

SONY SLV-685HF (E) 3-859-040-11 (1)

Page 34
Image 34
Sony SLV-685HF manual Setting up cable box control