58 | Setup menu |
Setup menu
59
Call setup
First
Enter the Setup menu by pressing »MENU«
Select »Call setup«
Outgoing call ID
Select »Outgoing call identifica- tion« to choose whether or not the persons you call should be able to see your phone number.
Speed dial
Activate »Speed dial« to make it possible to call numbers in your address or phone books from the standby display by pressing only one key.
Select »Define« and specify which phone number you want to assign to the keys 1 to 9.
If you should later want to change something in the se- quence of the allocated speed dial numbers, press »SELECT« and then select »Modify«.
If you want to remove the phone
number from the allocated speed dial key, select »Remove«.
Caller access
This feature allows you to limit the number of callers from which you will accept calls. You can select whether you want to receive calls from »All callers«, from a »Single caller« or from a »Group of callers«. You will then be asked to define the entries from which you will accept calls.
As long as the caller access fea- ture is activated, you will see this
symbol 
in the display.
If you receive a call from a num- ber from which you don’t allow calls, the call will automatically be rejected. You will be informed about
the rejected call by the 
sym- bol in the display
Facts & Tips
•Deactivating »Speed dial« enables you to enter letters, symbols and dig- its in the standby display and thus enter a USSD message containing both letters and digits.
•
USSD (Unstructured Supple- mentary Service Data) is a feature completely defined by your network awhich allows direct communication between you and your network. An example of using USSD could be if entering a certain code of digits and/or letters terminated by # tells your network to send you a list of charges.
Auto redial
If you have activated Auto redial and the phone number you are call- ing is busy or your call is not answered, you can let your phone make up to 10 automatic redial attempts.
A special redialling success tone is heard when the attempt is suc- cessful. To cancel the auto redial attempts, just press the
Any key answer
You can answer an incoming call by pressing any key you like, except the
Time and charge
The time and charge menu offers you the possibility of checking the duration and cost of your calls.
However, the call charge feature may not be supported by all net- work operators.
Status Here you can see the duration and cost of your latest incoming and outgoing call, your total incoming and total outgoing calls and a total of all calls. You can also see the remaining credit, if any, (only if you have prepaid your call charge). To reset your timers, just press »RESET«.
Display Select whether or not the call timer should be shown in the display during a conversation.
Setup Enter the unit price for your calls (check with your network operator) and enter the currency of your call charge. It is also possible to enter a maximum call charge limit; no more phone calls can be made when this maximum has been reached.
Facts & Tips
•Do not confuse Auto redial with the call back function described on p. 49. In the Call back function, the network automatically connects you to the busy subscriber when he is no longer engaged.
•Resetting of timers and setup of call charge may require you to enter your PIN2 code.
