Sony SLV-685HF manual General setup information, Setting the RF unit, Additional Information

Press POWER to turn on the VCR.

Additional Information

General setup information

Setting the RF unit

When connecting the VCR to the TV using only the antenna cable, you must set the RF UNIT switch on the rear of the VCR so that the TV can receive the correct signal from the VCR.

TV

RF UNIT

CH3 CH4

POWER CHANNEL +/–

1 Set the RF UNIT switch on the rear of the VCR to CH 3 or CH 4, whichever channel is not used in your area. If both are used, set the switch to either channel.

2

3 Press TV/VTR on the remote commander to turn on the VTR indicator in the VCR’s display window.

4 Press CHANNEL +/– to display a channel number in the display window. Select an active channel number in your area.

5 Turn on your TV and set it to the channel you selected in step 1 (channel 3 or 4).

The selected TV channel broadcast appears on the TV screen. If the channels change when you press CHANNEL +/–, you have made the correct setting.

Whenever you use the VCR, set the TV to the channel selected in step 1.

continued

Additional Information

61

SONY SLV-685HF (E) 3-859-040-11 (1)