Sony SLV-685HF Antenna hookup, Use this hookup if you’re using, TV A, B, or C, Match the type

Step 3: Hookups (continued)

Hookup 3

Antenna hookup

Pages 16 to 18

Make the following connections if you’re using an antenna (if you don’t have cable TV).

AUse this hookup if you’re using:

•VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)

•UHF-only antenna (you get channels 14 and higher)

•Separate VHF and UHF antennas

VCR

VHF/UHF

Rear of TV
VHF/UHF
A	Match the type of
or	connector on your
	TV: A, B, or C.
VHF
B

IN

OUT

or

UHF

VHF

C

UHF

BUse this hookup if you’re using a VHF-only antenna (you get channels 2–13 only)

VCR

VHF/UHF

IN

OUT

	Rear of TV
	VHF/UHF	Match the type of
	A	connector on your
or		TV: A, B, or C.
	VHF
	B	For connector types
or	UHF	B and C, no UHF
		connection is
	VHF	required.
	C

UHF

If you cannot connect your antenna cable to the VCR directly

If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external antenna connector (not supplied) so that you can connect the cable to the VHF/UHF IN connector. If you have separate cables for VHF and UHF antennas, you should use a U/V band mixer (not supplied). For details, see page 62.

16

Getting Started

SONY SLV-685HF (E) 3-859-040-11 (1)