Setting the clock (continued)
3 | Press CURSOR |
| to select YES, then press OK. |
|
4 | To activate the Auto Clock Set function, turn off the VCR. |
| The VCR automatically sets the clock by searching for a channel that |
carries a time signal and sets your time zone and Daylight Saving Time (if applicable).
If your clock is set to the wrong time zone or Daylight Saving Time, you can adjust these settings without turning off the Auto Clock Set feature (page 35).
Notes
*The clock cannot be set automatically if you don't receive a channel that carries a time signal in your area. If so, set the clock manually.
*If there are only a few channels in your area that carry time signals, setting the clock automatically may take up to about 30 minutes. If nothing happens even after you wait about 30 minutes, set the clock manually.
*If you use Hookup 1, make sure you leave the cable box on.
34
Getting started
