Setting the Camera Properties
After registration of the camera in the Camera Manager window, set the properties of the camera.
To start the setting, select the camera from the camera tree or the camera list. Then set the parameters on the Camera Properties dialog. The Camera Properties dialog has four tabs.
Note
It will take about 30 seconds maximum to apply the modified settings on the Camera Properties dialog to the camera.
General tab
Displays the basic information on the camera.
Name
Displays the camera name. To change the camera name, enter a new name in this box.
Type
Displays the camera model name.
Network
Displays TCP/IP.
Network edit button
To change the network settings, click this button. The Network Settings dialog appears.
For details, see “Network Settings dialog” below.
Network Settings dialog
Use this dialog to modify the network settings made when the camera has been registered.
The Network Settings dialog has two tabs.
Network Settings – General tab
Displays the port name in the Name box.
Network Settings – TCP/IP tab
IP Address
Enter the IP address or host name of the camera.
Port
Enter the port number of the camera.
Proxy Server
If you access the camera via a proxy server, select the Use a proxy server for this port checkbox and enter the IP address or host name of the proxy server and the port number.
To save the settings, click OK.
Setups
Setting a Camera
25
