Assigning a Camera to the Monitor Window
Assign a camera to each monitor window of the selected layout as follows.
1
The
2 Select Select Camera….
The Select Camera dialog appears.
3 Select the camera you want to monitor, then click OK.
The image of the selected camera is displayed in the monitor window.
To assign two or more cameras, repeat steps 1 to 3.
Note
If the camera is not connected to the network correctly, the message “NO CONNECTION” appears and alarm beeps sound.
Assigning a Storage
Location
You can specify the storage location for recorded video files and for snapshots.
1 Click the 
(Storage Locations) button on the main toolbar.
The Storage Location dialog appears.
2 Set the parameters in the Storage Location dialog.
Setups
Recordings: Enter the full path of the storage location. Click the Browse … button to browse and select the folder.
Capacity: Displays information of the drive specified in the path.
Remaining capacity: Set the capacity remaining to trigger the recording cleanup task in either
%or MB.
If the remaining capacity is lower than the set value, the following error message appears:
“Storage Location Manager Cannot record : Free disk space is only aaa - 50 (work area) = bbb MB (ccc %)?
aaa:Current remaining capacity
bbb:Capacity required for recording
ccc:The proportion that bbb occupies in the drive
The error message appears when the size “bbb” is lower than the value set on Remaining capacity.
To perform recording, delete unnecessary data.
Assigning a Storage Location
29
