Setups

Setting a Camera

To set up a camera, display the Camera Manager window by clicking the (Camera Manager) button.

Camera Manager Window

13

Setups

24

1 Camera Manager toolbar

Add Camera

Delete Camera(s)

Edit Camera(s)

2Camera tree

Displays the cameras registered in Network Camera Recorder in a tree configuration.

3Camera list

Displays the information of the cameras registered in Network Camera Recorder in list view.

4Camera Properties dialog

Set up the properties of the camera.

Registering a Camera

When you connect a new camera to the network, register the camera using the following procedure. Up to four cameras can be registered.

1 Click the (Add Camera) button on the Camera Manager toolbar.

The Add New Camera dialog appears.

Note

If the button is grayed out, click on Cameras in the camera tree. The button turns green and is enabled.

2 Set the parameters in the Add New Camera dialog.

Select a camera type: Select the model name of the camera from the drop-down list.

Name: Enter the name of the camera.

IP address: Enter the IP address or host name of the camera.

Port: Enter the port number of the camera.

Proxy Server: If you access the camera via a proxy server, select the Use a proxy server for this device checkbox and enter the IP address or host name of the proxy server and the port number.

3 Click OK.

Registration of the camera is completed, and the camera information is displayed in the camera tree and camera list.

To register the another camera(s), repeat steps 1 to 3.

24

Setting a Camera

Page 24
Image 24
Sony 9032PW, 6027PW, 5525PW, 1340PW manual Setting a Camera, Camera Manager Window, Registering a Camera