Monitoring
This section explains the procedure of monitoring from the selected camera.
Before monitoring, you need to register the camera(s) in the Network Camera Recorder application and assign the camera(s) to the monitor window.
For registration of cameras and assignment to the monitor window, see the “Setups” chapter on page 24.
1 Start Network Camera Recorder to display the main window.
For starting, see “1. Start the Program” on page 7.
The image(s) of the camera(s) appear(s) in the monitor window according to the selected layout.
2 Control the camera using the Pan & Tilt toolbar and Pan & Tilt Presets toolbar.
For details, see “Controlling the Camera” on page 15.
To monitor audio
When a microphone is connected to the selected camera, you can monitor the audio together with the camera image.
If you are monitoring multiple cameras, click on the monitor window showing the image of the camera whose you want to monitor. The audio of the selected camera is heard.
Using the Pop-up Menu in the Monitor Window
To change the camera in the monitor window
1 Select Select Camera… from the
2 Select the camera you want to monitor, then click OK.
The image in the monitor window changes to the image of the selected camera.
Note
If the application cannot establish communication with the selected camera, the message “NO CONNECTION” appears in the monitor window. Check the registered data of the camera and the network status.
Operations
Monitoring
13
