Audio tab

Perform the settings relating to the microphone connected to the camera.

Microphone

Select ON to transmit the audio signal input from the microphone connected to the camera.

Bit Rate

Select the bit rate to transmit the audio signal input from the microphone connected to the camera.

G.726 (16kbps), G.726 (24kbps), G.726 (32kbps) and

G.726 (40kbps) are available.

Note

When 16 kbps is selected, audio may delay to image in about three seconds maximum during monitoring. Audio and video are almost synchronized when they are played back.

Mic Volume

Set the volume input from the microphone connected to the camera. Maximum volume is obtained with the 10 setting.

Changing the Camera Properties

1 Select the camera whose properties you want to change from the camera tree or the camera list in the Camera Manager window.

The Camera Properties dialog appears.

2 Change the parameters in the Camera Properties dialog.

For details on each parameter, see “Setting the Camera Properties” on page 25.

3 Click the Apply button in the Camera Properties dialog to save the changed settings.

Note

The camera properties cannot be changed while the camera is in recording mode.

Deleting a Camera

To delete the registered camera, proceed as follows:

1 Select the camera you want to delete from the camera tree or the camera list in the Camera Manager window.

2 Click the (Delete Camera(s)) button on the Camera Manager toolbar.

A confirmation dialog appears.

3 Click Yes.

The selected camera is deleted.

Note

The recordings associated with the camera will remain, but cannot be displayed. If you want to delete the recordings, delete them before deleting the camera.

Setups

Setting a Camera

27

Page 27
Image 27
Sony 1340PW, 9032PW, 6027PW, 5525PW Changing the Camera Properties, Deleting a Camera, Audio tab, Microphone, Mic Volume