Introduction

Introduction

Features

Network Camera Recorder is software exclusively designed for use with Sony SNC-M1/M1W/M3/M3W Network Cameras. Network Camera Recorder allows you to monitor images of the cameras, record them and play back the recorded data.

Monitoring of up to four cameras

This application allows simultaneous viewing of up to 4 cameras, as well as recording and playback. It also provides for the control of the pan/tilt, and digital zoom. Additionally, monitoring of the audio from the built-in or connected microphone is possible.

Recording of camera image

This application allows recording of the image as well as audio from the camera. A recording schedule can be set by day, or by week at preset times, on each camera.

Playback of recorded data

This application allows various playback modes of the recorded data, such as fast-forward, rewind, frame playback, slow playback and cue to the point where playback started.

System Configuration

Cameras are connected to a network and controlled by a computer with Network Camera Recorder installed.

LAN

Network Camera

SNC-M1/M1W/M3/M3W

Network Camera

Wired orRecorder wireless*

Router or Hub

Computer

*Wireless LAN connection is available for the SNC-M1W and SNC-M3W only.

Internet

Network Camera

SNC-M1/M1W/M3/M3W

Network Camera

Recorder

Internet

Computer

Note

Do not access the camera via Network Camera Recorder or the Web browser while it is accessed by another Network Camera Recorder.

4

Features / System Configuration

Page 4
Image 4
Sony 9032PW, 6027PW, 5525PW, 1340PW manual Features, System Configuration