To watch slow motion in continuous play mode (DVD and VIDEO CD only)

Press X PAUSE, then press M SLOW y. With each press, the playback speed changes cyclically as follows.

To resume normal playback, press H PLAY.

Notes

•You can change the screen type using the “SCREEN SETUP” menu. (See “Screen Setup” on page 62)

•Do not perform VIDEO playback while playing back a disc.

•If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the point of the scratch.

•You cannot change the MP3 or the Multi Session CD playback speed.

•VIDEO CD fast forward/reverse and slow motion play cannot be paused.

•When playing a chapter with multi-angles on a DVD in slow motion, you cannot change the slow motion playback speed (1/2 only).

•During CD fast forward/reverse play, no sound is output.

•The PROGRESSIVE button is not available when the DVD player is in play mode. Use the PROGRESSIVE button in stop mode.

Notes on playing DTS* sound tracks on a CD

•When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the DVD player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be connected to the digital jack of the DVD player.

•Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a CD (page 80).

•Do not play DTS sound tracks without first connecting the DVD player to an audio component having a built-in DTS decoder. The DVD player outputs the DTS signal via the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Off” in “AUDIO SETUP” menu (page 60), and may affect your ears or cause your speakers to be damaged.

Notes on playing DVDs with a DTS sound track

•DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack.

•When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP” menu (page 60).

•If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “On” in “AUDIO SETUP” menu (page 60). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.

* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Operations Basic

Playing discs 33