Recording TV programs using the timer

You can preset up to eight programs at a time.

Before you start…

•Check that the DVD-VCR clock is set to the correct time.

•Turn on the DVD-VCR and your TV.

•Switch the input selector on your TV so that the signal from the player appears on the TV screen.

•Set TV / DVD·VIDEO to DVD·VIDEO, then press SELECT VIDEO to control the VCR (page 9).

•When using a cable box, turn it on.

•Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time.

•If the DVD player is in play mode, you cannot display the “SETUP MENU.” Stop the DVD playback.

?/1

CLEAR

SET UP

TIMER

INPUT SELECT

x STOP

V/v/B/b

ENTER

O RETURN

1

Press SET UP.

 

The “SETUP MENU” appears.

You can also use the TIMER button in VIDEO mode, then you can skip step 2.

42Recording TV programs using the timer