7

Press B/b to select the tape speed, Auto, SP,

or EP.

8

Press ENTER to confirm the setting.

 

 

To enter another setting, repeat steps 1 to 7.

9

10

Press O RETURN to exit the menu.

Press ?/1 to turn off the VCR.

The timer indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on.

To stop recording

To stop the VCR while recording, press x STOP.

To use the DVD-VCR after setting the timer

To use the DVD-VCR before a timer recording begins, just press ?/1. The timer indicator disappears from the display window and the DVD-VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR.

You can also do the following tasks while the VCR is recording:

•Reset the counter (page 38).

•Display tape information on the TV screen (page 40).

•Check the timer settings (page 53).

•Watch another TV program (page 41).

Tip

•To check, change or cancel the program setting, see “Checking/changing/canceling timer settings” on page 53.

Note

•If the VCR does not accept the PlusCode number, this means that:

–The PlusCode number is incorrect.

–ONCE, MO~FR, or Weekly was selected incorrectly. You cannot select MO~FR or Weekly for a program that airs more than seven days ahead.

Correctly set the PlusCode number again from step 2.

• When the PlusCode number is incorrect, “Invalid Code” will appear in the display.

52 Recording TV programs using the VCR Plus+® system