DVD Troubleshooting
| Symptom | Remedy |
|
|
|
| There is no picture/picture noise | • |
| appears. | • The connecting cords are damaged. |
|
| • Check the connection to your TV (page 11) and switch |
|
| the input selector on your TV so that the signal from the |
|
| player appears on the TV screen. |
|
| • The disc is dirty or flawed. |
|
| • If the picture output from your player goes through your |
|
| VCR to get to your TV or if you are connected to a |
Picture |
| combination TV/VIDEO player, the |
| signal applied to some DVD programmes could affect | |
|
| |
|
| picture quality. If you still experience problems even |
|
| when you connect your player directly to your TV, please |
|
| try connecting your player to your TV’s |
|
| |
|
|
|
| Even though you set the aspect ratio | • The aspect ratio of the disc is fixed on your DVD. |
| in “TV Type” of the “SCREEN |
|
| SETUP” menu the picture does not |
|
| fill the screen. |
|
|
|
|
| There is no picture from your VCR | • The DVD player must be in standby mode to view |
| connected to the LINE IN jacks. | pictures from your VCR. |
|
|
|
| There is no sound. | • |
|
| • The connecting cord is damaged. |
|
| • The player is connected to the wrong input jack on the |
|
| amplifier (receiver) (page 52). |
|
| • The amplifier (receiver) input is not correctly set. |
|
| • The player is in pause mode or in |
|
| mode. |
Sound |
| • The player is in fast forward or fast reverse mode. |
| • If the audio signal does not come through the DIGITAL | |
| AUDIO OUT (OPTICAL or COAXIAL) jack, check the | |
|
| audio settings (page 55). |
|
|
|
| Sound is noisy. | • When playing a CD with DTS sound tracks, noise will |
|
| come from the OUT AUDIO L/R jacks (page 30) or |
|
| DIGITAL OUT (OPTICAL or COAXIAL) jack. |
|
|
|
| The sound volume is low. | • The sound volume is low on some DVDs. The sound |
|
| volume may improve if you set “Audio DRC” to “Wide |
|
| Range” (page 57). |
|
|
|
106Troubleshooting