To change the password

1 Select “Change Password” in step 4 on page 64. The display for entering a new password appears.

2 Enter a new 4-digit password using the number buttons. The display for confirming the password appears.

3 Re-enter the new password.

To turn off the Parental Control function

Set “Use Password” to “No” in step 3 on page 64.

To play a disc for which Parental Control is set

1 Insert the disc, then press H.

The display for entering your password appears.

2 Enter your 4-digit password using the number buttons. The player starts playback.

If you forget your password

1 Remove the disc and turn off the DVD-VCR.

2 Turn on the DVD-VCR again with no disc in the unit.

3 Hold down m and M on the front panel simultaneously for 5 seconds. “Reset OK” appears on the screen.

4 Turn off the DVD-VCR. The password is cleared.

5 To create a new password, follow step 3 on page 64.

Notes

•When you play DVDs which do not have the Parental Control function, playback cannot be limited on this player.

•All the ratings higher than the level you select will be blocked.

•Write your password down and keep it in a safe place in case you forget it.

•All DVD settings below which you set in the “DVD SETUP” menu will also be cleared when you reset the DVD-VCR to clear the password setting.

–Language Setup

–Audio Setup

–Screen Setup

–Parental Setup

Adjustments and Settings DVD

Parental Control (limiting playback by children) 65