• Audio DRC (Dynamic Range Control)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks:

–OUT AUDIO L/R jacks

–DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby

Digital” is set to “D-PCM.”

The default setting is indicated in bold print.

Standard

Normally select this position.

 

 

Wide Range

Gives you the feeling of being at alive performance.

 

 

Notes

•If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged.

•Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.

•If you set “DTS” to “On,” you cannot select surround setting (page 77).

Adjustments and Settings DVD

Audio Setup 57