To cancel the Auto Set Up function
Press SET UP.
To change the RF channel
If the picture does not appear clearly on the TV, change the RF channel on the DVD- VCR and TV. Select “Install” in the “OPTION” menu, then press V/v to select “Video Output CH.” Select the RF channel by pressing the B/b buttons and press ENTER. Then, tune the TV to the new RF channel so that a clear picture appears.
Tip
•If you want to change the language for the
Notes
•Whenever you operate the Auto Set Up function, some of the settings (VIDEO Plus+, timer, etc.) will be reset. If this happens, you have to set them again.
•Auto preset starts automatically only when you plug in the mains lead for the first time after you purchase the
•If you want to use the Auto Set Up function again, select “Install” in the “OPTION” menu, then press V/v to select “Auto Setup.”
•Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more during power off with no tape inserted.
Started Getting
Setting up the