Step 4 : Setting up the DVD-VCR with the Auto Set Up function
Before using the DVD-VCR for the first time, set up the DVD-VCR using the Auto Set Up function. With this function, you can set TV channels, guide channels for the VIDEO Plus+ system, and DVD-VCR clock automatically.
Before you start…
•To control the DVD-VCR, set TV / DVD·VIDEO to DVD·VIDEO on the remote (page 9).
SET UP
V/v/B/b
ENTER
Turn on your TV and set it to the video channel.
If your TV does not have a Scart (EURO-AV) connector, tune the TV to channel 21 (the initial RF channel for this DVD-VCR). Refer to your TV manual for TV tuning instructions. If the picture does not appear clearly, see “To change the RF channel” on page 15.
Connect the mains lead to the mains.
The DVD-VCR automatically turns on and the DVD-VCR starts searching for all of the receivable channels and presets them (in the appropriate order for your local area).
If you want to change the order of the channels or disable unwanted programme positions, see “Changing/disabling programme positions” on page 21.
AUTO SETUP
Please wait 10%
RETURN 
SET UP
After the search is complete, the current time appears for any stations that transmit a time signal. If the time does not appear, set the clock manually. See “Setting the clock” on page 17.
14Setting up the DVD-VCR with the Auto Set Up function
