Step 2 : Setting up the remote commander

Inserting the batteries

Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment.

Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position.

Using the remote commander

Remote sensor

You can use this remote

 

commander to operate this DVD-

 

VCR and a Sony TV. Buttons on

 

the remote commander marked

 

with a dot (•) can be used to

 

operate your Sony TV.

TV /

If the TV does not have the

DVD·VIDEO

symbol near the remote sensor, this

SELECT

remote commander will not

VIDEO

operate the TV.

 

 

 

 

 

SELECT

 

 

DVD

To operate

Set TV / DVD·VIDEO to

the DVD player

DVD·VIDEO, then press SELECT DVD and point at the remote sensor at

 

the DVD-VCR

 

the VCR

DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor

 

at the DVD-VCR

 

your TV

TV and point at the remote sensor at your TV

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery with an old one.

•Do not use different types of batteries.

•Do not leave the remote commander in an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction.

10Setting up the remote commander