If the picture is not clear

If the picture is not clear, you may use the Manual Fine Tuning (MFT) function. After step 5, press V/v to select “MFT.” Press B/b to get a clear picture. Then press ENTER.

Tip

• The DVD-VCR must receive channel information for station names to appear automatically.

Note

•When adjusting MFT, the menu may become difficult to read due to interference from the picture being received.

Changing/disabling programme positions

After setting the channels, you can change the programme positions as you like. If any programme positions are unused or contain unwanted channels, you can disable them.

You can also change the station names. If the station names are not displayed, you can enter them manually.

Changing programme positions

Before you start…

• Turn on the DVD-VCR and your TV.

• To control the DVD-VCR, set TV / DVD·VIDEO to DVD·VIDEO on the remote (page 10).

• Set your TV to the video channel so that the signal from the player appears on the TV screen.

• If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback.

SET UP

V/v

ENTER

ORETURN

1

SET UP

Press SET UP, then press V/v to select

 

(OPTION) and press ENTER.

ENTER

 

 

 

 

 

 

 

 

OPTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Language

:English

 

 

 

 

Clock

 

 

 

 

 

 

 

Install

 

 

 

 

 

 

 

User Set

 

 

[ Off ]

 

 

 

 

Auto Power Off

 

 

 

 

 

Screen Messages

 

[ On ]

 

 

 

 

Power Save

 

[ Off ]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V v

 

ENTER

 

RETURN

 

SET UP

 

 

 

 

 

 

 

 

 

 

22Presetting channels