3
4
5
Follow the instructions appearing on the screen.
1Ensure your TV is (525P/625P) Progressive Scan capable.
2Connect with Component Video Output jacks (red/green/blue connections).
see “Use this hookup if your TV has component video input jacks” on page 56.
3Press B/b to select [OK] to test your video signal.
If video signal appears OK, video connection is complete. Press ENTER.
The PROGRESSIVE indicator on the unit lights up in orange.
If picture is distorted, press O RETURN. Check the connection (page 56).
Press SET UP to exit the menu.
SCREEN SETUP
Progressive Scan Output
1)Connect with Component Video Output jacks.
2)Select [OK] to test your video signal.
3)If video signal appears OK, video connection is complete.
| OK | CANCEL |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B b |
| ENTER |
| RETURN |
| SET UP | |
SCREEN SETUP
TEST SCREEN
SCREEN SETUP
If picture is OK, press [ENTER] key.
If picture is distorted, press [RETURN] key.
To Deactivate
Press [PAUSE] button on the product for 5 seconds.
ENTER 
RETURN
SCREEN SETUP
TV Type | [ 4:3 Letter Box ] |
| ||
DVD LINE1 RGB Out | [ Off ] |
| ||
DVD |
| [ Off ] |
| |
DVD Component Out | [ On ] |
| ||
Progressive |
| [ On ] |
| |
|
|
|
|
|
|
|
|
|
|
V v B b | RETURN |
| SET UP |
|
and Settings DVD
Tip
•The “Progressive” setting can be canceled in stop mode by pressing X on the unit continuously for 5 seconds or more, or selecting “Off” in step 2.
Note
•If you select progressive signal when you connect the DVD player to a TV that cannot accept the signal in progressive format, the image quality will deteriorate. In this case, set “Progressive” to “Off.”
Adjustments
Screen Setup 63