• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks:
–OUT AUDIO L/R jacks
–DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby
Digital” is set to
The default setting is indicated in bold print.
Standard | Normally select this position. |
|
|
Wide Range | Gives you the feeling of being at alive performance. |
|
|
Notes
•If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged.
•Noise may occur in the LinearPCM
•If you set “DTS” to “On,” you cannot select surround setting (page 81).
•You cannot perform DTS audio output during playback quickly or slowly with sound (page 31).
Adjustments and Settings DVD
Audio Setup 59