To change the password

1 Select “Change Password” in step 4 on page 67. The display for entering a new password appears.

2 Enter a new 4-digit password using the number buttons. The display for confirming the password appears.

3 Re-enter the new password.

To turn off the Parental Control function

Set “Use Password” to “No” in step 3 on page 67.

To play a disc for which Parental Control is set

1 Insert the disc, then press H.

The display for entering your password appears.

2 Enter your 4-digit password using the number buttons. The player starts playback.

If you forget your password 1 Turn on the DVD-VCR.

2 Remove the disc and close the disc tray.

3 Hold down m and M on the front panel simultaneously for 5 seconds. “Reset OK” appears on the screen.

4 Turn off the DVD-VCR. The password is cleared.

5 To create a new password, follow step 3 on page 67.

Notes

•When you play DVD VIDEOs which do not have the Parental Control function, playback cannot be limited on this player.

•All the ratings higher than the level you select will be blocked.

•Write your password down and keep it in a safe place in case you forget it.

•All DVD settings below which you set in the “DVD SETUP” menu will also be cleared when you reset the DVD-VCR to clear the password setting.

–Language Setup

–Audio Setup

–Screen Setup

–Parental Setup

68Parental Control (limiting playback by children)