5

CHAINE

Press CHAINE +/– (repeatedly) to select the appropriate TV system

 

for your area.

Select “L” for the L TV system (SECAM), or “G” for the B/G TV system (PAL).

6

7

Tune the TV to the same channel shown in the VCR display window so

that the picture on the right appears MAGNETOSCOPE SONY clearly on the TV screen.

Refer to your TV manual for TV tuning instructions.

If you select the wrong TV system in step 5, the picture on the right may

not appear. Select the appropriate TV system and tune the TV again.

If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below.

REGLAGE Press REGL CANAL.

AUTO

You have now tuned your TV to the VCR. Whenever you want to play a tape, set the TV to the video channel.

REGL CANAL

To check to see if the TV tuning is correct

Set the TV to the video channel and press CHAINE +/– on the VCR. If the TV screen changes to a different programme each time you press CHAINE +/–, the TV tuning is correct.

To obtain a clear picture from the VCR

If the screen does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing REGL CANAL in step 2, press CHAINE +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel so that a clear picture appears.

20Tuning your TV to the VCR