If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. However, if the picture is not clear, you may also use the manual tuning function.
1 Press CHAINE +/– or the programme number buttons to select the programme position for which you cannot obtain a clear picture.
2 Press MENU, then select REGLAGES and press OK.
3 Select REGLAGE DES CHAINES, then press OK.
4 Select ACCORD FIN, then press OK. The fine tuning meter appears.
REGLAGE DES CHAINES
PROG. 4
| NORME | L |
| |||
| NORMAL / CABLE | NORMAL |
| |||
| REGLAGE CANAL | C2 7 |
| |||
| NON |
| ||||
| AFT |
|
|
|
|
|
| ACCORD FIN |
|
|
|
|
|
| RETOUR |
|
|
|
|
|
|
|
|
|
|
|
|
REGLER : |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| SORTIE : | MENU | |||
Selected programme position
5 Press </,to get a clearer picture, then press MENU to exit the menu. Note that the AFT (Auto Fine Tuning) setting switches to NON.
Tuning the French CATV channels
This VCR can scan the CATV channels B to Q and the HYPER frequency channels S21 to S41. On the REGLAGE DES CHAINES menu, the channels are indicated by S01 to S44 REGLAGE CANAL numbers respectively. For example, channel B is indicated by REGLAGE CANAL number S01 and channel Q by REGLAGE CANAL number S23. (See the table below.)
If the CATV channel you want to preset is indicated by its frequency (for example, 152.75 MHz), refer to the table below to find the corresponding channel number. Channel number S05 is for this example.
28Presetting channels