7
8
9
Press 
PROG.
PROG
The programme position or station name appears in the display window.
SP OPC
MAGN
PROG | Turn PROG to set the programme position. |
|
To record from a decoder or other source connected to the 
PROG or press CHOIX ENTREE to display “L1” or “L2” in the display window.
CHOIX | SP OPC | |
MAGN | ||
ENTREE | ||
| ||
|
|
Press 
PROG to complete the setting.
PROG
“OK” appears in the display window for about five seconds.
The 
indicator appears in the display window and the VCR stands by for recording.
To record from a decoder or other source, leave the connected equipment switched on.
To return to the previous step
To return to the previous step, press the CHAINE + and – buttons on the VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press xSTOP.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The 
indicator turns off and the VCR switches on. Remember to press ?/1to reset the VCR to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
•Reset the counter (page 44).
•Display tape information on the TV screen (page 47).
•Check the timer settings (page 68).
•Watch another TV programme (page 47).
52Recording TV programmes using the Dial Timer