General setup information (continued)

Attaching the external antenna connector

When using a 300-ohm twin lead cable for VHF/UHF antenna, use the EAC-32 antenna connector (not supplied) to connect the antenna to the VCR.

300-ohm twin lead cable

EAC-32 Antenna connector (not supplied)

1

2

3

Loosen the screws on the antenna connector.

Wind the twin leads around the screws on the antenna connector.

Retighten the screws.

Attaching a UHF/VHF band mixer

When using both 75-ohm coaxial cable and 300-ohm twin lead cable for VHF/ UHF antenna, use the EAC-66 UHF/ VHF band separator/mixer (not supplied) to connect the antenna to the VCR.

300-ohm twin lead cable

EAC-66

UHF/VHF band separator/ mixer (not supplied)

75-ohm coaxial cable

1

2

3

4

Loosen the screws on the mixer.

Wind the twin leads around the screws on the mixer.

Retighten the screws.

Connect the 75-ohm coaxial cable to the mixer.

68Additional Information